All data is for information only------(Home)
PRODUCT DATA of Scotch Tape Y 966
MaterialScotch Tape Y 966
Product DatasheetY966
Product TypeAdhesive transfer tape.
Chemical CompositionAcrylic
Name of Manufacturer3M Belgium
Hermes Laan, 7, B-1831 Diegem, Belgium
+32 (0)2 722 51 11
+32 (0)2 720 02 25
www.3m.com
EXPERIENCE IN PRACTICE
Development StatusCommercial Product
Cost RangeLow
Lot ReproducibilityFair
Space ExperienceFair
PHYSICAL PROPERTIES
Thickness0.05 mm
MECHANICAL PROPERTIES
Ultimate Tensile Strength0.003 MPa
Remark:@ 160°C; Test piece: 1.27 x 7.65 cm)
Data Quality: Manufacturer's data
Tensile Peel Strength0.18 N/mm
Remark: 90° peel
Data Quality: Manufacturer's data
Tensile Strength0.003 N/mm
Data Quality: Manufacturer's data
THERMAL PROPERTIES
Temperature Range-40 to 150°C
Data Quality: Manufacturer's data Long term
RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY
Thermal CyclingPass
Test:ECSS-Q-70-04
Temperature Range(space)-40°C to +150°C.
Test:Manufacturer’s Data, Long Term
Outgassing(Avg data)TML = 0.425%, RML =0.295%, CVCM = 0%
Test:ECSS-Q-70-02
SPECIAL RECOMMENDATIONS
Special RecommendationsRecommended as a replacement for Scotch Tape 467 (same basic properties, but better temperature and solvent resistance). · When used to bond fragile materials such as Second Surface Mirrors (SSM), the tape must be applied first on the structure side. The liner is then removed and a suitable shape SSM bonded. If tape is already applied to the back of the SSM (as in some Sheldahl products), the liner must be removed with the utmost care so as to avoid stresses on the SSM · Availability in Europe is limited when purchased quantity is very small. Maximum width is 122 cm. · Not to be used when peel forces are applied.